Variable Speed Lathes

DY-680VS~980VS (BED 458MM)Variable Speed Lathes

参考价: 面议

具体成交价以合同协议为准
2022-05-09 15:10:08
280
产品属性
关闭
岸揚機械股份有限公司

岸揚機械股份有限公司

免费会员
收藏

组合推荐相似产品

产品简介

Variable Speed Lathes

详细介绍

MODEL DY-680VS DY-780VS DY-880VS DY-980VS
SWING Distance Between Centers 1100 / 1600 / 2000 / 2500 / 3000 / 3500 / 4000 / 5000 / 6000 / 7000 / 8000mm
Swing Over Bed 680 mm 780 mm 880 mm 980 mm
Swing Over Cross Slide 440 mm 540 mm 640 mm 740 mm
Swing Over Gap 970 x 482 1070 x 482 1170 x 482 1270 x 482
Height of Center (Over Bed) 340 mm 390 mm 440 mm 490 mm
BED Width 458 mm
HEADSTOCK Spindle Nose D1-11 / A2-11 / A2-15
Spindle Bore 105 mm / 155 mm (OPT.) / 230 mm (OPT.)
Spindle Speed (rpm)

25~70, 60~160, 145~380, 320~1000 rpm

24~65, 55~140, 130~350, 300~800 rpm

5~14, 15~49, 50~159, 160~450rpm
FEEDS - THREAD Leadscrew Ø45 mm. 2T.P.I. or 6 pitch
Number of Feed Changes 36
Longitudinal Feed Range 0.05 ~ 0.70 mm/rev
Cross Feed Range 0.025 ~ 0.35 mm/rev
Inch Threads 2 ~ 28 T.P.I (36 Kinds)
Metric Threads P0.8 ~ 14mm (65 Kinds)
D.P. No. / range D.P 4 ~ 56 D.P (36 Kinds)
Module Pitches No. / Range MOD 0.5 ~ 7 MOD (22 Kinds)
TOOL SLIDE Cross Slide Travel 340 mm 390 mm 440 mm 490 mm
Compound rest travel 240 mm
TAILSTOCK Quill Travel 180 mm
Quill Diameter 105 mm
Taper of Center MT#6
MOTOR Main Motor 20HP / 4P, 25/30HP / 4P (OPT.)
Rapid Feed Motor 1/ 4 HP
Coolant Pump 1/8 HP
Length (mm) 2700 / 3200 / 3700 / 4200 / 4700 / 5200 / 5700 / 6700 / 7700 / 8700 / 9700mm
Width (mm) 1240
Height (mm) 1400 1450 1500 1550
N.W (kg) 3300 / 3600 / 3900 / 4200 / 4500 / 4800 / 5100 / 6100 / 7200 / 8300 / 9500kg

Workpiece Weight Capacity Chuck only Chuck + Tailstock Chuck + 1 Steady rest + Tailstock Chuck + 2 Steady rest + Tailstock
Spindle bore 105mm 600kg 1700kg 2700kg 4000kg
Spindle bore 155mm 1000kg 2000kg 3000kg 5000kg
Spindle bore230mm 1400kg 2400kg 3400kg 5400kg
* Above specifications are subject to change without notice. Special requirement please connect with us.
上一篇：恒兴重工科技有限公司参观立嘉国际智能装备展览会指南 下一篇：双头数控车床
热线电话 在线询价
提示

请选择您要拨打的电话：