DY-560M~760M (BED 410MM)-Clutch Lathe-岸揚機械股份有限公司手机版

详细介绍

MODEL		DY-560M	DY-660M	DY-760M
SWING	Distance Between Centers	1000 / 1500 / 2000 / 2500 / 3000 / 4000 / 5000 / 6000 mm
	Height of Center (Over Bed)	280 mm	330 mm	380 mm
	Swing Over Bed	560 mm	660 mm	760 mm
	Swing Over Cross Slide	310 mm	410 mm	510 mm
	Swing Over Gap	800 mm	900 mm	1000 mm
BED	Width	410 mm
HEADSTOCK	Spindle Nose	D1-8 / D1-11 (Opt.)
	Spindle Bore	104 mm / 130 mm (Opt.)
	Spindle Speed (rpm)	25 ~ 1250rpm
	Number of Spindle Speed	12 Change
FEEDS - THREAD	Leadscrew	Ø45 mm. 2T.P.I. or 6 pitch
	Number of Feed Changes	36
	Longitudinal Feed Range	0.05 ~ 0.70 mm/rev
	Cross Feed Range	0.025 ~ 0.35 mm/rev
	Inch Threads	2 ~ 28 T.P.I
	Metric Threads	P0.8 ~ 14 mm
	D.P No. / Range	D.P 4 ~ 56
	Module Pitches No. / Range	MOD 0.5 ~ 7
TOOL SLIDE	Cross Slide Travel	380 mm
TOOL SLIDE	Compound Rest Travel	255 mm
TAILSTOCK	Quill Travel	180 mm
	Quill Diameter	75 mm
	Taper of Center	MT#5
MOTOR	Main Motor	15 HP / 20 HP (Opt.)
	Rapid Feed Motor	1/4HP
	Coolant Pump	1/8 HP
Length (mm)	2800 / 3300 / 3800 / 4300 / 4800 / 5800 / 6800 / 7800mm
Width (mm)	1400
Height (mm)	1530	1630	1730
N.W (kg)	2400 / 2700 / 3000 / 3300 / 3700 / 4500 / 5200 / 6000kg

* Above specifications are subject to change without notice. Special requirement please connect with us.
Workpiece Weight capacity	Chuck only	Chuck + Tailstock	Chuck + 1 Steady rest + Tailstock	Chuck + 2 Steady rest + Tailstock
Spindle bore 104mm	500kg	1200kg	2000kg	3000kg
Spindle bore 130mm	600kg	1300kg	2100kg	3100kg