DY-460M~510M (BED 330MM)-Clutch Lathe-岸揚機械股份有限公司手机版

详细介绍

MODEL		DY-460M		DY-510M
SWING	Distance Between Centers	1100 / 1600 / 2100 / 3100 mm
	Swing Over Bed	460 mm		510 mm
	Swing Over Cross Slide	270 mm		320 mm
	Swing Over Gap	710 mm		760 mm
	Height of Center (Over Bed)	230 mm		255 mm
BED	Width	330 mm
HEADSTOCK	Spindle Nose Spindle Bore	D1-8:80 mm / 102 mm (Opt. for 510m)
	Spindle Speed (rpm)	36 ~ 1500rpm
	Number of Spindle Speed	12 Change
FEEDS - THREAD	Leadscrew	Ø35 mm. 4T.P.I. or 6 pitch
	Number of Feed Changes	32
	Longitudinal Feed Range	0.04 ~ 1.0 mm/rev
	Cross Feed Range	With rapid traverse: 0.02-0.5 mm/rev; Without rapid traverse: 0.04~1.0 mm/rev
	Inch Threads	37 Kinds, 2 ~ 56 T.P.I
	Metric Threads	41 Kinds, P0.2 ~ 14
	D.P No. / Range	19 Kinds D.P 8 ~ 44
	Module Pitches No. / Range	18 Kinds M 0.3 ~ 3.5
TOOL SLIDE	Cross Slide Travel	260 mm
TOOL SLIDE	Compound Rest Travel	127 mm
TAILSTOCK	Quill Travel	130 mm
	Quill Diameter	75 mm
	Taper of Center	MT#5
Motor	Main Motor	10 HP / 12.5 HP (Opt.)
Motor	Coolant Pump	1/8 HP
Packing	Size L x W x H (mm)	1100 mm	1600 mm	2100 mm	3100 mm
	DY-460M	2370 x 1100 x 1750	2880 x 1100 x 1750	3400 x 1100 x 1750	4410 x 1100 x 1750
	DY-510M	2370 x 1100 x 1800	2880 x 1100 x 1800	3400 x 1100 x 1800	4410 x 1100 x 1800
WEIGHT (Approx.)	N. W / G. W	2000, 2150 kg	2300, 2450 kg	2800, 3000 kg	3600, 3850 kg

* Above specifications are subject to change without notice. Special requirement please connect with us.
Workpiece Weight Capacity	Chuck only	Chuck + Tailstock	Chuck + 1 Steady rest + Tailstock	Chuck + 2 Steady rest + Tailstock
Spindle bore 80mm	300kg	800kg	1000kg	1500kg
Spindle bore102mm(Op. for 510M)	400kg	900kg	1100kg	1600kg