| 型号 | Model | CW6163C | CW6180C | CW61110C |
| 床身上zui大工件回转直径 | Max.swing diameter of workpice over bed | 630mm | 800mm | 1110mm |
| zui大工件长度 | Max:workpiece length | 1500mm 3000mm | 1500mm 3000mm | 1500mm 3000mm |
| 刀架上zui大工件回转直径 | Max.swing diameter of workpiceover tool-post | 350mm | 520mm | 780mm |
| 主轴内孔直径 | Spindle bore | 100mm |
| 主轴孔前端锥度(公制) | Taper of spindle nose(metric) | 1:20 |
| 主轴转速范围、级数 | Range and steps of spindle speed | 7.5～1000r/min 18种kinds |
| 纵横向进给量 | Longitudinal and cross feeds | Each 64种kinds:0.1～24.3mm/r |
| 床鞍快速移动速度 | Rapid speed of carriage | 4000min/min |
| 横、纵向进给量比 | Cross-to-longitudinal feed rate | 1/2 |
| 丝杠螺距 | Screw pitch of leadscrew | 12mm |
| 公制螺纹种数、范围 | Number and range of metric thread | 50种 kinds,1～240mm |
| 英制螺纹种数、范围 | Number and range of withworth thread | 26种 kinds,14～1t.p.i(牙/英寸) |
| 模数螺纹种数、范围 | Number and range of module thread | 53种 kinds,0.5～120mm |
| 径节螺纹种数、范围 | Number and range of diametral pitch thread | 24种 kinds,28～1t.p.i(牙/英寸) |
| 下刀架zui大横向行程 | Max:travel of cross tool-post | 315mm 400mm |
| 上刀架zui大行程 | Max:travel of upper tool-post | 200mm |
| 尾座套筒直径 | Tailstock’s center sleeve bore | 100mm |
| 尾座套筒行程 | Travel of tailstock’s center sleeve | 250mm |
| 尾座套筒锥度 | Taper of tailstock’s center sleeve | Morse No.5(莫氏) |
| 主电动机功率 | Main motor power | 11kw |
| 净重 | Net weight | 4.2t 5.2t 4.6t 5.6t 4.5t 5.6t |
| 机床外形、长 | Overall dimensions length | 3690mm 5190mm 3690mm 5190 3690mm 5190mm |
| 宽 | Width | 1380mm 1425mm 1380mm |
| 高 | Height | 1450mm 1535mm 1390mm |
