T2是一款紧凑、多功能、非常可靠的仪器，它采用的电子和气动技术，提供的性能。

T2是专为有限区域的工作台手工使用而设计的，特别是在医疗部门和洁净室，但它也可以集成在PLC管理的自动化系统上。

性能

T2可提供2 bar或6 bar的全尺寸模型。

还可以使用Staubli连接器将泄漏控制程序连接到仪表上。

测试压力可通过手动减压器调节，调节压力显示在显示屏上。

连接

T2有多个通信接口进行通信:用于PLC连接的数字I/O接口、RS232/RS485、以太网接口、USB。测试记录可通过USB，以太网。

T2 - EP Option for obstrucion test in continuous

The equipment works into a continuos mode, checking whether each small tube under test is free of occlusions. The test starts immediately and automatically after the tube is easily inserted by the operator into the test port. The operator won’t have to press any button to start the measurement.
Each tube is tested independently, T2- EP gives the result on the screen up to the tube is finally removed by the operator. Thanks to the green and red leds on the equipment and on the screen, and an audible alarm, the operator has an immediate PASSED or FAILED result and can verify that the tube under test has no obstructions. Each result is available up to the tube is removed from the equipment test port.

Tecna Leak Tester Accessory: AV10

The AV10 pneumatic module is supplied as an external accessory to be connected to air leak testing equipment.This module is designed for blood line leak testing, in air with a pressure of up to 2 bar, through Luer tapered fittings. This version is equipped with a mechanism that automatically starts (start at the leak tester) the test when the operator connects the blood line, and automatically releases it at the end of the test if the test result is positive (good).The mechanism reduces the overall testing time and makes it easier for the operator to distinguish good parts from rejected parts.

• 泄漏测试的全量程:6 bar
• 3.5寸彩色液晶显示屏，触摸屏
• 多达100个测试程序表
• 用于与PLC连接的数字I/O接口
• 串行线RS232/485和USB通讯接口用于PC连接
• 测试记录通过以太网是可用的