VMC

V-11DVMC

参考价: 面议

具体成交价以合同协议为准
2022-05-19 11:19:18
421
产品属性
关闭
厚銘興業股份有限公司

厚銘興業股份有限公司

免费会员
收藏

组合推荐相似产品

产品简介

Table Size 1250 x 610 mm ......

详细介绍

FEATURES

STANDARD FEATURES
Spindles
  • ■
    10,000 - rpm Spindle Direct-Drive
  • ■
    Spindle Diameter : 60 mm on model: e-600/750
  • ■
    Spindle Diameter : 70 mm on model: e-750A/850/1000/1100/1300
  • ■
    Spindle Diameter : 90 mm on model: e-1800
Spindles Coolant
  • ■
    Spindle Coolant System (4000 BTU) on model: e-600/750/850/1000/1100/1300
  • ■
    Spindle Coolant System (8000 BTU) on model: e-1800
  • ■
    Spindle Air Blast before Tool-exchange
  • ■
    Spindle Nose Coolant Jet Flushing
  • ■
    Spindle Side Air Blow Nozzle & Coolant Nozzle
  • ■
    Spindle All-time Air Curtain
Contorl Units
  • ■
    FANUC
  • ■
    MITSUBISHI
  • ■
    SIEMENS
  • ■
    HEIDENHAIN
Tools Magazine
  • ■
  • ■
    20 pockets Arm-type Automatic Tool Change Mechanism (e-600 ~ e-1300) 
  • ■
    24 pockets Arm-type Automatic Tool Change Mechanism (e-1800)
  • ■
    24 pockets Arm-type Automatic Tool Change Mechanism (BT#50) (e-1300 G5 / e-1800 G5)
Chip & Coolant System
  • ■
    Chip Conveyor : Screw-drive, Machine Front Side   (e-600 ~ e-1000)
  • ■
    Chip Conveyor​ : Chain-type, Machine Front Side     (e-1100 / 1300 / 1800)
Electrics & Certification
  • ■
    Maximart standard electrics system
Safety Device & Lubrication
  • ■
    Full Enclosure Machine Guard
  • ■
    Machine Auto Power-off Function
  • ■
    Z -axis Auto Ascend when Power Failure (Fanuc / Mitsubishi only)
  • ■

  • ■
    3 Colors Signal Light
X / Y / Z Axes Movement
  • ■
    X/Y/Z -axis high Precision Linear Guideway w/ Self-lube Device
  • ■
    Standard Z -axis Brake Motor
  • ■
    X/Y/Z -axis Precision C3 Grade Ball screw
  • ■
    Direct-drive transmission
Product Options
  • ■
    Air Gun & Coolant Gun
  • ■
    Rigid Tapping
  • ■
    Leveling Pads & Bolts
  • ■
    Tools & Toolbox
  • ■
    Operational Manual & Parts List
OPTIONAL FEATURES
Spindles
  • ■
    12,000 - rpm Spindle Direct-Drive without Coolant through spindle function
  • ■
    12,000 - rpm Spindle Direct-Drive with Coolant through spindle function
Spindles Coolant
  • ■
      8 bar - ​​Coolant Supply through Spindle ​with Filtering System
  • ■
    20 bar - ​Coolant Supply through Spindle with Filtering System
  • ■
    20 bar - ​Coolant Supply through Spindle with ​Centrifugal Separator
  • ■
    50 bar - ​Coolant Supply through Spindle with ​Paper Bａnd Filter
  • ■
    70 bar - ​Coolant Supply through Spindle with ​Paper Bａnd Filter
  • ■
    ** Spindle Motor w/ Coolant through Spindle (CTS) Function must be selected**
Contorl Units
  • ■
    FANUC / MITSUBISHI / SIEMENS / HEIDENHAIN  Controller Upgrade
  • ■
  • 24 Months warranty on control unit
Tools Magazine
  • ■
  • ■
    Arm-type 30 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)
  • ■
    Arm-type 48 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)
  • ■
    Arm-type 60 pcs tool magazine upgrade (e-600/750(A)/850/1000/1300)
  • ■
    Arm-type 40 pcs tool magazine upgrade BT#40 (e-1800)
  • ■
    Arm-type 32 pcs tool magazine upgrade BT#50 (e-1800)
  • ■
    Arm-type 40 pcs tool magazine upgrade BT#50 (e-1800)
  • ■
    DIN40 (DIN 69871/69872) instead of BT40 Spindle Taper
  • ■
    HSK-A63 instead of BT40 Spindle Taper
Chip & Coolant System
  • ■
    Chip Conveyor : ​Scraper type, left-side with Chip Cart
  • ■
    Chip Conveyor​ : ​Chain type, left-side with Chip Cart
  • ■
    Chip Cart
  • ■
    Extra Pump for Water Spray Gun
  • ■
    Coolant / Oil Skimmer
Electrics & Certification
  • ■
    CE/EMC Marking (including EN ISO13849-1)
  • ■
    Transformer to suit local Power Supply
Safety Device & Lubrication
  • ■
    Main Door (front-side) Interlock + Feed Hold Device
  • ■
    Electrical Cabinet with Main Breaker
X / Y / Z Axes Movement
  • ■
    X/Y/Z -axis under Heidenhain Absolute 0.1μm Linear Scales
  • ■
    Extended Y -axis travel to 710mm on model: e-1100/1300
  • ■
    Extended Z -axis travel 220mm on model: e-850/1000/1100/1300
  • ■
    Extended Z -axis travel 300mm on model: e-1800
  • ■
    200mm Riser Block on Column on model: e-600/750(A)
4th Axis preparation
  • ■
    Wiring + Plug Preparation for 4th -axis w/o Driver and Motor
  • ■
    4th -axis Driver + Motor + PLC Package
Automation & Probing
  • ■
    Renishaw - TS-27R - Tool Setting Probe system + Software
  • ■
    Renishaw - ​OMP400 - ​Workepiece Measurement + Software
  • ■
    Renishaw - ​RMP40 - ​Workpiece Measurement + Software
  • ■
    Blum - ​Z-Nano - Tool Setting Probe system + Software
  • ■
    Blum - ​ZX-Speed - ​Tool Setting Probe system + Software
上一篇：立式加工中心机在智能制造中的应用与发展 下一篇：三轴硬轨立式加工中心：精密制造的核心力量
热线电话 在线询价
提示

请选择您要拨打的电话：