品牌
生产厂家厂商性质
所在地
| MODEL | Unit | AC-S5060 | AC-S5080 | AC-S50120 | AC-S50160 | AC-S50200 | AC-S50240 | ||
| CAPACITY |
|
| |||||||
| Center height | mm | 665 | |||||||
| Swing over bed | mm | 1270 | |||||||
| Swing over cross slide | mm | 944 | |||||||
| Dist. between center | mm | 1700 | 2200 | 3200 | 4200 | 5200 | 6200 | ||
| Width of bed | mm | 610 | |||||||
| SPINDLE |
|
| |||||||
| Spindle bore | - | Ø155(6") | Ø230(9")opt. | Ø305(12") opt. | Ø410(16") opt. | ||||
| Spindle nose | - | A2-11 | A2-15 | A2-20 | A2-28 | ||||
| Spindle speeds | rpm | H: 151~800 M: 31~150 L: 6~30 | H: 111~560 M: 21~110 L: 4~20 | H: 54~270 M: 11~53 L: 2~10 | H: 43~215 M: 9~42 L: 1.5~8 | ||||
| FEED RATE |
|
| |||||||
| X-axis rapid travel | m/min | 5 | |||||||
| Z-axis rapid travel | m/min | 6 | 5 | 4 | |||||
| TRAVEL |
|
| |||||||
| Cross slide travel X-axis | mm | 680 | |||||||
| Longitudinal travel Z-axis | mm | 1500 | 2000 | 3000 | 4000 | 5000 | 6000 | ||
| Ball screw ( Dia. x pitch) | mm | X: Φ40 x P8 Z: Φ80 x P16 | |||||||
| TAILSTOCK |
|
| |||||||
| Spindle dia. | mm | Ø165 | |||||||
| Spindle travel | mm | 300 | |||||||
| Taper in spindle | - | MT#6 (Build In Type Quill) | |||||||
| MOTOR |
|
| |||||||
| Servo motor | kw | 22 / 33 | |||||||
| X-axis drive motor | Nm | 23.5 | |||||||
| Z-axis drive motor | Nm | 32 | |||||||
| Coolant pump motor | Bar | 4.3 (50HZ) / 6 (60HZ) | |||||||
| WEIGHT |
|
| |||||||
| Net weight | kg | 10600 | 11400 | 13000 | 14600 | 16200 | 17800 | ||
Note:
We have the right to modify the specification or designs. If there are subjected to change
without prior notice.
AC-S5000 Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Fagor control | l Fanuc & Siemens Control on request | |
| l Main spindle 2 steps speed auto Change by | l 3-Jaw manual chuck | |
| l CNC Control | l 4-Jaw manual chuck | |
| l Coolant equipment | l 3-Jaw hydraulic chuck | |
| l Lubricate equipment | l Manual toolpost (4T) | |
| l Work light | l Electric servo toolpost (H4) | |
| l Center sleeve | l Electric turret (V8) | |
| l Dead center | l Hydraulic turret (V8) | |
| l Tool box & tools | l C axis (Living tool) | |
| l Operation & Service Manual | l Steady rest | |
|
| l Follow rest | |
|
| l Boring attachment | |
|
| l Double chuck system | |
|
| l Rotating center | |
|
| l Hydraulic tailstock | |
|
| l Rotating tailstock | |
|
| l Chip conveyer | |
|
| l Heat exchanger | |
|
| l Spindle oil cooler | |
|
|
| l Tailstock type : Build in type quill |
