Key type numerical control & fully automatic working.
Easy to input programs, and the operator is no need of special training.
Have auto emergency stop device and can work continuously or return to work beginning point.
There is a memory device in controller.
Have Self-inspecting program. So if internal data is disturbed. It will snow the word -ERROR- and stop working to protect the system.
If the data you set is wrong.it will also show the word -ERROR- and stop working to protect the system.
Afler cutting finished, it will give an alarm to warm the operator.
High precision, high efficiency & automatic type. increasing the output, reducing the cost & raising profit.
項目 / 型號
NLZ-210 CNC
鉋頭衝程
210 mm
鉋頭傾斜角度
10°
分度比
1:90
可分割數
0 ~ 999
最小分割單位(電腦分度盤)
0.01° Degree
分割精度
40秒 seconds (angle)
分度定位精度
2秒 seconds (angle)
鉋頭垂直調整距離
320mm
鉋頭每分鐘衝程數
27, 42, 67, 105
鉋頭導路下端至工作台距離
470
工作台面積
Ø450mm
工作台前後移動距離(伺服馬達)
510mm
工作台左右移動距離(伺服馬達)
440mm
工作台自動進給量
0.01 ~ 2.0
進退往復定位精度
±0.01
主電動機
3HP 3Ø 220V
自動進給馬達(伺服)
1 KW
分度馬達(伺服)
2 KW
裝箱尺寸
1,500 x 2,000 x 2,300 mm
淨重
2,300 kgs
CHARACTERISTCS
Through the use of a brake motor, ram position can easily to obtained with the push button panel.
The ram sliding ways and driving gears have been hardened and precision ground.
All working components of the machine are lubricated by a central forced lubricating system, automatically.
Under step motor driving and computer control, the work table can feed in Y axis and index automatically by programs setting In case that the computer is breakdown, a manual operation can be optional.
Ram motion is linkage transmitted.
Ram cam swivel 10° forward to finish a tapered hole work piece.
Machine frame is constructed of high tensile cast iron, tempered to prevent deformation.
A automatically hydraulic tool lining and work table clamping device are provided.
Worktable slide ways & screw have built with telescopic cover and centralized lubricating system to prolong the life of the machine.
Indexing worm wheel adopts of aluminium bronze under precision processing. The worm is processed by heat treatment and ground precisely, and the gap can be adjusted freely high precision of index, and durable for long service.
The center bore of working table is enlarged and deepened to process for the long shaft.
