Z-Pico-刀具测头-波龙诺孚特贸易（上海）有限公司手机版

详细介绍

Wear-free, optoelectronic signal generation

Opto-electronic switching signal generation

The trigger signal is generated via shading of a miniature light barrier
Enables much higher measuring speeds and accuracy than with conventional probes
Wear-free with long-term stability

High-precision, modern measuring mechanism using linear working principle

Tool measuring probe with ball bearing mounted linear guide

Ball-bearing precision linear guidance
The functional principle prevents lateral forces acting on the tool
Very low measuring force

Reliable measurement and monitoring of micro-tools

Z-Pico tool measuring probe with drill bit

Measurement and breakage detection of sensitive and very small tools
Tool measurement from D = 0.05 mm
Extremely fast measurement at up to 2 m/min

BLUM tool measuring probes

Tool measuring probes by BLUM can be used for the most varied measurement and monitoring tasks in CNC machining centres.

Tool Breakage Detection

Non-contact breakage detection of centric tools such as drills, mills, engraving tools, taps and reamers.

Tool Length Measurement

Automatic setting and wear monitoring of tools by quick and precise length measurement.

Wear compensation

Compensation of tool wear using measurements between the machining steps. The wear value is stored as an additive correction value in the tool offset memory.

Temperature compensation

Compensation of the temperature-dependent thermal behaviour of machining centres.

Coolant load

Reliable and fast measurements in coolant thanks to modern measuring mechanism and robust design.

Mass Production

Perfectly suitable for mass production under the harshest conditions.

Tool setting probe Z-Pico

Technical drawing of Z-Pico tool measuring probe

Extremly compact tool setting probe with cable connection

Max. probing speed: 2 m/min
Repeatability: 1 μm 2σ (standard)
Min. tool diameter: > 0.05 mm*
Protection class: IP67

* Depending on geometry and material of tool. Probing force must not result in damage to tool.

Additional information can be found in the relevant brochure and in the operating manual.

BLUM measuring cycles

The measuring cycles are user-friendly subroutines of the machine control. They can be used on milling and turning machines for the following measuring tasks

Calibrating the probe
Tool length measurement
Tool wear monitoring
Tool breakage detection (monitoring drill bit breakage, engraving tools, etc.)

The measuring cycles are available for many conventional controls. Your local BLUM-representative will gladly inform you about the range of features for your control.

Blow nozzles for tool cleaning

The optional blow nozzles by BLUM effectively clean the tool and measuring surface of any coolant and chips.

产品简介