CGK系列大型双端数控车床

设计了双主轴箱，一侧主轴可移动。满足了不同加工长度工件切削刚性要求。
A double main axle box is designed, one side of the main axle can move. The requirements of cutting rigidity of workpieces with different machining length are met.
机床采用左右床鞍、双刀架、双系统控制，可单独对刀，调整，--次装夹两端同时独立切削。主轴采用变频无极调速150~700r/min
The machine tool adopts left and right bed saddle, double tool rest and double systemcontrol, which can be adjusted and adjusted independently, and both ends of one clamping can be cut independently at the same time. The spindle adopts frequency conversion stepless speed regulation 150 ~ 700 r/min.
达到同轴度≤0.02mm，也可作为以车代磨的可靠工艺基准，提高工效4~6倍。
When the coaxiality is less than or equal to 0.02mm, it can also be used as a reliable technological standard to replace grinding with vehicle, and the work efficiency can be increased by 4-6 times. 

CGK系列大型双端数控车床