模内攻牙机LFT-5K/GF

◆多向攻牙，可分为有上向下，有下向上，水平方向及独立攻牙，满足不同模具要求。
◆攻牙头可更换，一机多用，更换丝维安全迅速。
◆多孔攻牙，在不同牙距与牙距之间，同步多孔完成攻牙（多可6孔）视牙径而定。
◆攻牙范围，公制，英制，丝锥皆可。
◆可依客户要求，提供攻牙机攻牙机数量无限制，单机大可攻12孔。

 ◇Multi direction tapping, can be divided into up and down, up and down, horizontal and independent tapping, to meet the requirements of different molds.
◇Tapping head can be replaced, the use of a machine, replacing the fibers safely and quickly.
◇Porous tapping, in the distance between the teeth and the distance between the teeth, the completion of the synchronized porous tapping (up to 6 holes) depending on the size of the teeth.
◇Tapping range, metric, inch, taps are available.
◇According to customer requirements, the number of special tapping machine tapping machine is unlimited, the largest single attack 12 holes.

模内攻牙机LFT-5K/GF