W009深孔内圆磨床

用途及结构特点Purpose and Structure Characteristics
※MS-1型内圆磨床主要用于磨削深孔。
※磨孔直径50~ 400mm,大廟削深度800mm。(经特殊订货磨孔直径可增大至500mm.大磨削深度可至00m)
※床头箱回转角度士10° (可磨削锥孔)
※工作台行程采用液压无级调速。
※特殊订货.可满足主轴锥孔的磨削。
※MS-1ype internal grinder mainly applies to deep hole grinding.
※Grinding diameter of 50-400mm, max. grinding depth of 800mm.
(via special order, the grinding diameter can be enlarged to 500mm, maximum depth of grinding up to 1000mm)
※Revolution angle of the spindle head is土10 ° (can grind taper hole)
※The work bench is hydraulic stepless speed regulation.
※Via special order,can grinding spindle cone holes.

W009深孔内圆磨床