全自动锯床，也可以半自动操作，电焊钢构件底座配合电子气动控制的数控锯床，支持可编程操作，用圆锯片来切割铜铝等轻质合金
---可进行左45°至右45°任意角度锯切；锯头可以左向倾斜到45°以进行斜面切割
---一代MEP设计的双轴微处理器控制，在同一段材料上，可以设定1000批次不同长度和数量的程式
---伺服马达送料，单次送料长度600mm, 可以多次重复送料
---可旋转式控制操纵台便于操作者在每一个不同的位置操作锯床和紧急停车
---二十字节四行可以显示：编程数量和已执行数量，锯片厚度，每次送料长度，锯切时间，
主电机输出电流，诊断/报警信息
--- 报警信息和事件可以被记录，以方便查找可能的故障
--- 根据材料的尺寸大小，可以直接从控制键盘精确调节锯头上下限位
COBRA 352 NC evo, automatic/semi-automatic electropneumatic CNC sawing machine to cut aluminium and light alloys using blade with electrowelded hard-metal plates (HM).
- The machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts.
- Sawing machine with controlled double axis multimicroprocessor with the latest generation of controllers for CNC automatic sawing machines designed by MEP so as to obtain, on the same bar, 1000 different lots, each of different lengths and quantities.
The Standard FEATURES:
- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
- Display: 20 characters read on four lines so as to visualize technological parameters such as:
number of cuts programmed and carried out+ bａnd thickness + length fed in each stroke +cutting time + amperometer + diagnostics and/or aution messages (more than 100) visualized.
- Registration of alarms and events with the possibility to visualize the story of occurred events.
- Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).
- The headstroke, according to the dimensions of the material which has to be cut, is set directly from the control panel
