机床特点：

★本机床适用于中小轴、轴套、法兰盘类工件外圆柱面、外圆锥面、内孔、内圆锥面及台肩磨削加工。

★机床砂轮架、头架、工作台可以转动一定角度，且工作台、砂轮架除液压驱动外，还可手动。以适应

车间生产或机修

★本机床可采用、卡盘或弹簧卡头装夹工件

技术规格：TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

距Distance between centers                                               370/520mm

磨削直径Diameter to be ground                                                   φ5-φ125mm

磨削长度Max. length to be ground                                         350/500 mm                                                      

磨削孔径Aperture to be ground                                                     φ10-φ40

磨削孔深Max. depth to be ground                                                  50

工作台回转角度Table rotation angle                                            ± 9°/± 7°

头架的回转角度Rotation angle of headstock                                   ± 45°

砂轮架回转角度Rotation angle of grinding wheel rack                                   ± 180°

工件重量Max. weigth of workpiece                                                10kg

砂轮尺寸Dimensionof Max. grinding wheel                              φ300×（20-40）×φ127mm

砂轮线速度Linear speed of grinding wheel                                            ≤35m/s                                                 

砂轮架电机功率Motor power of grinding wheel rack                                     2.2kw

机床外形尺寸Outline dimension of machine tool

                                             1770×1190×1600/  2240×1190×1600mm

净重  Net weight

                                                            1900/2100 Kg

毛重  Gross weight                                                           2000/2200 Kg

工作精度：WORKING ACCURACY（磨削国家标准试磨件）

圆度 ：磨外圆           0.0015 mm

      卡盘磨外圆           0.0025 mm

      卡盘磨内圆           0.0025 mm

圆柱度          0.005 mm

表面粗糙度      Ra:0.32μm

平面布置图

1. 主机高度1300mm

2. 机床应安装在远离震源的坚固基础上，用机床底下的3块垫铁来调整安装水平。用水平仪检查机床的水平性。纵向≤0.04/1000，横向≤0.04/1000，当机床调整完毕后，可加入必要的辅助垫铁，注入混凝土固定