机床特点：

★本机床主要是面向国内外机电晶体行业，水晶石矩形片磨削成圆形片，并可在返程后

二次进给磨出所需之圆缺（平台）而开发的新型机床。

★该机床可以手动操作，也可自动磨削，生产效率高

★ 本机床采用液电联合控制，工作方式分单独磨圆及磨圆后一次磨扁两种

技术规格：TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

磨削直径Diameter to be ground                                                   φ5-φ20mm

磨削长度Max. length to be ground                                               100 mm                                                       

 磨扁进刀深度Grinding depth                                                        1 mm

工作台回转角度Table rotation angle                                                   ± 9°

头架的回转角度Rotation angle of headstock                    顺时针：10°  逆时针：90°

砂轮架回转角度Rotation angle of grinding wheel rack                                   ± 180°

砂轮尺寸Dimensionof Max. grinding wheel                              φ300×26×φ127mm

砂轮线速度Linear speed of grinding wheel                                            ≤35m/s                                                 

砂轮架电机功率Motor power of grinding wheel rack                                     2.2kw

机床外形尺寸Outline dimension of machine tool                     

1500×1200×1450mm

 净重  Net weight                                                                  1300 Kg

 毛重  Gross weight                                                               1400 Kg

工作精度：WORKING ACCURACY（磨削国家标准试磨件）

圆度 ：           0.03 mm

           直径一致性：      0.03 mm  

表面粗糙度       Ra：1.6μm

平面布置图

1. 主机高度1300mm

2. 机床应安装在远离震源的坚固基础上，用机床底下的3块垫铁来调整安装水平。用水平仪检查机床的水平性。纵向≤0.04/1000，横向≤0.04/1000，当机床调整完毕后，可加入必要的辅助垫铁，注入混凝土固定