S78-10-02机床减振垫铁适用范围：
金属切削机床、数控机床、锻压机床、橡胶机械、纺织、轻工机械、食品加工机械等加工中心。
Application :
Metalcutting machine 、Numerical control machines ,Metalforming machines ,Rubber and plastic machines ,Spinning machines and Food process machines.

S78-10-02机床减振垫铁产品特点：
1、 安装机床不需埋设地脚螺栓，缩短安装周期，节省安装费用。
2、 根据生产工艺变化，随意调整机床位置，实现生产流水线柔性化设计。
3、 调整机床水平方便、迅速。
4、 隔振、减振、降低噪音。
5、 耐油性，耐腐蚀性强
Feature of product:
Machines are stationary on floor without anchors. Therefore the cost and time of installation can be greatly saved.
The layout of machines can be changed freely according to the modification of manufacturing process. So it is easy to design the flexible production line.
It is convenient and quick to adjust the level of machine.
Vibration and noise can be reduced and isolated by using this product.
It can resist oil and corrosion greatly.

注意事项：
1、 安装调整设备水平时，应使每个垫铁都受力，消除虚接触点。
2、 车间地面平度相差大，垫铁调整高度不能满足时，应在低点位置的垫铁和机床基座之间加装平钢板后，再进行水平调整。
3、 产品使用，机床使用两周后，应再调一次机床水平。
4、 机床调换位置时，起重前，应先卸下垫铁。
Note:
1. Every mounts should have loads when adjust the level of machine .
2. Flat steel plate should be added between the lowest mount and base of machine when the level difference of floor is great and adjusting height of is not enough. Then level of machine can be adjusted .
3. The level of machine should be readjusted after two weeks in use when it is used firstly .
4. The mounts should be removed before the machine is lifted when the position of machine is changed .

技术参数及选用表:
Specification and chart for choice: