品牌
经销商厂商性质
所在地
ADM-4500加工中心机械参数
ADM-4500 MACHINING CENTER Parameter
| 规格 | Specification | ADM-4500 |
| 工作台规格 | Table Specifications |
|
| 工作台尺寸 | Table size | 450＊780mm |
| T形槽尺寸 | T Slots | 18＊5＊90mm |
| 工作台负重 | Table Loading | 200Kg |
| 行程规格 | Travel Specifications |
|
| X轴行程 | X Axis Longitudinal Travel | 500mm |
| Y轴行程 | X Axis Cross Travel | 400mm |
| Z轴行程 | Z Axis vertical Travel | 400mm |
| 主轴中心至工作台面距离 | Spindle Center to Table Surface | 550mm |
| 主轴中心至立柱距离 | Spindle Center to Column Surface | 450mm |
| 门宽 | Door Opening width | 650mm |
| 主轴 | SPINDLE |
|
| 主轴锥度 | Spindle taper | BT40 |
| 主轴转速标准 | Spindle Speed (Standard) | 8000rpm |
| 主轴转速特别 | Spindle Speed（Option） | Belt 10,000 rpm |
| 主轴转速特别 | Spindle Speed（Option） | Built-in30,000rpm |
| 进给速度 | Feed Rate |
|
| 快速进给 | Rapid Feed Rate | 20m/mim |
| 切削速度 | Cutting Feed Rate | 5-5000mm/mim |
| 马达 | Motor |
|
| 主轴马达标准 | Spindle Drive Motor (Standard) | 3.5Kw |
| 主轴马达特别 | Spindle Drive Motor（Option） | 5.5kw |
| 三轴马达 | x,y,z Axis motors | 1-1.5kw/per axis |
| 刀库 | Tool Changer |
|
| 刀库标准 | Tool changer (Standard) | 16 position |
| 刀库选配 | Tool changer（Option） | 20 position |
| 其它 | Other |
|
| 控制器标准 | Control(standard) | Mitsubishi64 |
| 控制器选配 | Control（Option） | Syntec pc /Fanuc |
| 配重/汽压缸 | Control(standard) | Air cylinder |
| 所需马力 | Control（Option） | 15KW |
| 所需汽压 | Block/Air Cylinder | 6-7 Bar |
| 冷却马达 | Power Requirement | 1HP |
| 水箱容量 | Air Source | 75L |
| 机台净重 | Cooling Motor | 2800Kgs |
| 机台毛重 | Coolant Tank Capacity | 3200Kgs |
| 机台尺寸 | Net Weight | 270＊200＊250cm |
标准配置： STANDARD EQUIPMENT
● 全密闭式工作台防屑罩 ●Fully enclosed splash guard
● 切削冷却装置 ●Coolant system
● 自动润滑装置 ●Automactic lubrication system
● 主轴吹气装置 ●Air blast through spindle
● 主轴转速表与负菏表 ●Spindle speed meter and load meter
● 工作照明灯 ●Working lamp
● 润滑液、切削液及气压力不足警示灯 ●Insufficient lubricant ,coolant and air pressure
Warning lamp
● 机械异常状态警示灯 ●Machine malfunction warning lamp
● 暂停指示灯 ●Hold indication lamp
● 水平调整螺栓与基础块 ●Leveling bolts and blocks
● 使用手册 ●Operation and programming manua
● 工具箱 ●Tool box
● X,Y,Z三轴滚珠螺杆预拉装置 ●Pre-tensioned ball screws on X,Y and Z-axis
特殊附件： OPTIONAL EQUIPMENT
● 第四轴旋转工作台 ●4th axis rotary table
● 油冷式主轴冷却机 ●Spindle oil cooler
● 深孔加工冷却装置 ●Cooling device for deep hole machining
● 自动*量测装置 ●Automatic tool measuring device
● 自动*寿命管理 ●Automatic tool life management
● 自动除屑机与集屑车 ●Chip conveyor and chip bucket
●主轴转速10,000rpm ●10,000 rpm spindle speed
● 多组脉波产生器 ●Ｍulti-pulse generator
●*长度量测器 ●Tool length measuring device
稳定、高刚性机械结构
● 本机主要机械结构体采用米汉纳高级铸铁制成，经应力消除，确保结构体*不变形。
● X，Y轴配置线性滑轨，Z轴为硬轨。
● 三轴采用C3级高级精密滚珠螺杆，经预压处理，将热变位降到zui低程度。在长时间高速移动下，可维持*精度与寿命。
皮带式主轴
8,000RPM标准（standard）
10,000RPM选购（Optional）
●皮带式主轴可选择8,000l转或10,000转。
●主轴适合使用BT-40刀把
内藏式主轴
● 内藏式主轴高达30,000转，特别适合高速加工。
● 主轴使用HSK-25刀把
Stable, Rigid Machine Structure
● The major structural parts of the machine are manufactured from high-quality Meehanite cast iron and stressrelieved to ensure deformation-free performance.
● Linear guideways on the X and Y axes. Box ways on the Z axis .
● The three axes employ high precision ball screws which are pre-tensioned to reduce thermal displacement to a minimum. The machine also ensures high feeding accuracy at high speed traverse for long time operation and long service life.
Belt Drive Spindle
● The belt drive spindle provides 8,000 and 10,000RPM to choose from.
● The spindle accommodates a BT-40 tool shank.
Built-in Type spindle
● The Built-in Type spindle provides 30,000RPM for high speed machining.
● The spindle accommodates an HSK-25 tool shank.
Get the Competitive Edge with the Correct VMC from Advance.
Desihned and built for highly efficient machining and long-term accuracy,the ADM-4500 VMC from the Advance Company has advanced design features
Which distinguish it from competing models. It is ruggedly constructed throughout thereby assuring optimum rigidity and stability for years of trouble-free operation.
This compactly constructed machine will let you perform machining more efficiently and accuray to help your business stay competitive.
