Solar Simulator for PV Module Testing IV Flasher-武汉曜华激光科技有限公司手机版

详细介绍

Solar Simulator's Application：
Mainly used inautomatic test and result record of mono-crystalline silicon, poly-crystalline silicon solar module and thin-film module.

Solar Simulator's Features:

1. Flash impulse continuous adjustable range10-100ms

2. Four-line measurement; 14-bit 4-channel high-speedsynchronous

acquisition card, 8000 data collectingpoint;

3. 10 parameters display;measured parameter display intabulation and graphicway;

4. Irradiance automatically compensating; temperatureautomaticallycompensating;

5. Voice counts off and prompts of flash time;countingprompts of flash time

6. 24 consecutive hours of work, working life of imports.Xenon lamp is 300,000 times of flash

Parameter of solar simulators:

Model	YHMT-AAA	YHMT_A
Lamp Spectrum	In line with IEC60904-9 and JISC8933(A Grade)
Light Intensity	100mW/cm2 (continuous adjustable range20-120mW/cm²)
Light intensity non-uniformity	≤±2%[A]	±3%
Instability degree of irradiation	≤±2%[A]	±2%
Test results consistency	≤±0.5%[A]	±1%
Test error of electrical properties	≤2%	≤2%
Single flash time (customized for flexible panel)	10ms-30ms~100ms
Effective Test Range	1200*2000nm /5W-300W ( Can customized for big size)
Measuring Voltage	0-100V(Resolution 1mV)
Measuring current	0-20A(Resolution 1mA)
Environmental temperature	15℃~30℃
Test Parameters	Isc, Voc,Pmax, Vm,Im,FF,EFF,Temp,Rs,Rsh
Power	110V/220V~ 50Hz /60Hz

产品简介

详细介绍