德国 HASKEL 液压泵 dyz

德国 HASKEL 液压泵 dyz

压缩介质

1. Petroleum base oils, Kerosene, Diesel fuel, with 5% soluble oil.

2. Plain Water.

3. Most phosphate Ester base fire resistant hydraulic fluids:e.g., Pydraul, Lindol, Cellulube, Fyrquel, and Houghtosate 1120 and Petroleum base solvents compatible with UHMWPE (Ultrahigh Molecular Weight Polyethylene) dynamic, and Viton static seals.

4. Petroleum base solvents,e.g., Boron fuels, Aromatic hydrocarbons( Benzene ,Toluene Xylene, Hylene, etc.);Chlorinated solvents (Trichloroethylene, Carbon Tetrachloride,? Chlorobenzene ,etc.); Mecaptans, Dowtherm A, Fluoronated solents(Fluorobenzene, Fluorochloroethylene ,etc.); Dowtherm E, plus all of group 3 plus some mildly corrosive acids compatible with wetted materials.
   See note (5A) for service with Methyl-Ethy-Ketone, Methyl Acetone, Diacetone, Alcohol and Freon 22

5. Skydrol and Aerosafe hydraulic fluid. Acetone and some alcohols (Ethy, Methy and isopropyl).Also suitable for these fluid if viton static seals replaced with EPR, specify modification number 51331(no extra change),e.g..5133-MDTV-5.(Most Phosphate Estar base fluids solidify at approximately 206 MPa .)

6. Deionized water.
   NOTE: a) Dynamic seal life with non-lubricating fluids will understandably be less than with lubricating type.
   b) Consult factory for additional chemical resistance data.

HASKEL 1/3HP PUMP 【1/3马力（0.25Kw）haskel液体增压泵系列】

1. Maximum intermittent pressure for stainless steel in MS, 29723 and MCPV series pumps is 69MPa

2. 较高驱动气压力0.85MPa( Maximum drive pressure0.85MPa)