High precision 5‑Axis Milling Center with turning function
Nmill 1400T
Added value:
- Large working space with excellent ergonomics and low space requirement
- Heavy, scraped cast-iron base and supports with a high-precision guidance system and thermostable structure
- NC rotary table with dynamic direct drive with hydraulic clamping at desired angle, rotary transmission for additional functions, optional speed range up to 500 rpm with automatic alignment function
- Complete machining from roughing to finishing is augmented by milling/turning function
- Reliable high-precision spindles with oilair
lubricant with HSK63/HSK100 interface, swivelling A‑Axis can be hydraulically clamped at desired angle - The Nmill design has been proven 100 times
- Model for turning that has an optional hydraulic clamping function for the spindle
- Uses the latest generation of control technology from HEIDENHAIN and SIEMENS
- New comfortable operating design with 19″ TFT monitors with NILES-HMI
Optional packages:
- Internal coolant supply, unregulated 40 bars of pressure | flow rate 25 l/min
- Internal coolant supply, regulated 80 bars of pressure | flow rate 18 l/min
- Rotoclear on front/side
- Minimum lubrication
- Coolant Mist extraction
- Tool probing by using lasers
- Table top load cell
- Sensor for measuring workpiece
- Higher precision
- Thermal and vibration sensors
- Remote diagnosis
- Tailored solutions
Technical data
| Specification | 1400 T | |
| Work area | ||
| Longitudinal, X | mm | 1380 |
| Lateral, Y | mm | 1150 |
| Vertical, Z | mm | 895 H / 720 V |
| Swivelling axis | degree | 16 / ‑120 |
| Tilting axis | degree | n x 360 |
| Working spindle 40% ED, S6 | ||
| Mill-Turn funktion 18000 rpm HSK-T63 | kW / Nm | 38 / 193 |
| Mill-Turn funktion 12000 rpm HSK-T100 | kW/ Nm | 34 / 325 |
| Feed rate | ||
| Rapid traverse (X, Y,Z) | m/min | 30 |
| Rapid traverse (swivelling) | rpm | 20 |
| Rapid traverse (turning) | rpm | 500 |
| Work table | ||
| Clamping surface | mm | ø 1000 |
| Max. table load | kg | 1500 |
| Tool changer | ||
| HSK 63 | number | 30 / 46 / 92 / 220 |
| HSK 100 | number | 32 / 64 / 134 |
| Control unit | ||
| Heidenhain | TNC 640 | |
| SIEMENS | 840D sl |