TK13M系列数控高速立卧回转工作台各类数控镗、铣床和加工中心的重要附件。可分别以立式和水平平分两种方式安装于主机工作台上，用作主机的第四轴。工作时利用主机的控制系统或专门的控制系统，完成与主机相协调的各种必须的分度回转运动。工作台上除了可安装板、盘或其他形状复杂的被加工零部件外也可以利用与之配套的尾座，对长轴类零件进行加工，实现等分、不等分的连续的孔槽、曲面的加工，且达到较高的精度。另外也可和非数控机床配套、利用专门配置的控制系统(特殊订货)独立地完成等分和不等分的孔、槽以及连续的圆弧面的加工。
　　TK13M series Hor.,vert. NC high speed rotary table with through hole in the spindle center is suitable for either horizontal or vertical position,t is a perfect accessory for NC miller and machine center.Used in combination with the control of Nc machine tool or an independent control for non-NC machine tol,ontinuous cutting work for board type,disk type,hole plate as well as other parts fixed between table and tllstock can be carried out,especially with the through hole in the spindle center,hydraulic(pneumatic)actuating cllect and chuck can be used to proceed long shaft type parts.