※万向节注意事项：
1调整时不能超过规定的角度15度
2如超过此极限。心轴易磨损或断裂
3工作时应经常加润滑油脂
※Note of cardan Joint
1.Do not set the angle to more than the specifled l5 degrees.
2.If the limit is exceeded，the shaft will be easy to wear or break.
3.During work，lubrication should be added frequently.
型号 Type | SU80 | SU110 | SU165 | SU200 | SU250 | SU300 |
筒夹规格Collet/ 大钻孔能力 Max.Drilling Capacity | D4 | ER8/5 C5/5 ERll/7 C6/6 ERl6/10 C9/9 ER20/13 C12/12 | ER8/5 C5/5 ERll/7 C6/6 ERl6/10 C9/9 ER20/13 C12/12 | ER8/5 C5/5 ERll/7 C6/6 ERl6/10 C9/9 ER20/13 C12/12 | ER8/5 C5/5 ERll/7 C6/6 ERl6/10 C9/9 ER20/13 C12/12 | ER8/5 C5/5 ER11/7 C6/6 ERl6/10 C9/9 ER20/13 C12/12 |
转速比 Gear Ratio | 1∶1 | 1∶1 1∶2 | 1∶1 1∶2 | 1∶1 1∶2 | 1∶1 1∶2 | 1∶1 1∶2 |
小距离（二轴间） Lowest Distance(Two Spindle) | 10 | 13(ER8 C5) 18(ER11 C6) 26(ER16 C9) 28(ER20 C12) | 13(ER8 C5) 18(ER11 C6) 26(ER16 C9) 28(ER20 C12) | 13(ER8 C5) 18(ER11 C6) 26(ER16 C9) 28(ER20 C12) | 13(ER8 C5) 18(ER11 C6) 26(ER16 C9) 28(ER20 C12) | 13(ER8 C5) 18(ER11 C6) 26(ER16 C9) 28(ER20 C12) |
大轴心范围 Max.Range of Centers | 80 | 110 | 165 | 200 | 250 | 300 |
轴数Spindle | 2-4 | 2-6 | 2-10 | 4-12 | 4-12 | 4-14 |