项目 | Item | H3Y-007 |
******磨削直径 | Max. diameter to be ground | 200mm |
带量仪******磨削直径 | Max. diameter to be ground with the measurement | 100mm |
较小磨削直径 | Min. diameter to be ground | 8mm |
******磨削长度 | Max. length to be ground | 500mm |
******工件重量 | Max. workpiece weight | 50kg |
中心高 | Height of center | 125mm |
工作台******移动量 | Max. travel of table | 600mm |
工作台******回转角度 | Max. angle of swivel of the table | 顺时针 Clcckwise 5° 逆时针 Anti-clockwise 9° |
工作台移动速度范围 | Traverse speed | 0.1~4 m/min |
工作台手轮一转移动量 | Table travers per turn hａnd wheel | 6 mm |
主轴转速范围 | Spindle speed | 60, 85, 230, 120, 170, 460 rpm |
主轴锥孔规格 | Spindle hole taper | No. 3 Morse |
卡盘规格 | Chuck | 125 mm |
尾架套筒锥孔规格 | Tailstrok quill taper | No. 3 Morse |
尾架套筒移动量 | Travel of tailstork quill | 25 mm |
砂轮架******移动量 | Max.travel of wheelhead | 150 mm |
砂轮架快速移动量 | Rapid feed travel of wheelhead | 40, 60, 70 mm |
砂轮机手轮一转移动量 | Travers per turn hａnd wheel | 1mm |
微调捏手一格移动量 | Travers per graduation on wheelhead | 1.25μm |
主轴转速 | Spindle speed | 2230 rpm 1845 rpm |
砂轮规格 (Dxtxd) | Grinding wheel size (Dxtxd) | 400X40X127 mm |
******砂轮线速度 | Max.peripheral speed of grinding wheel | 35 m/s 45 m/s |
液压系统工作压力 | Spindle speed of internal grinding wheel | 0.8~1 Mpa |
冷却泵流量 | Flow rate of cooling pump | 25 L/min |
砂轮电机功率 | Grinding wheel motor | 3 kw |
总功率 | Total motor power | 4.04 kw |
机床外形尺寸（长X宽X高） | Overall dimensions (LxWxH) | 2000X1420X1600 mm |
机床重量 | Weight of machine | 2100 kg |
