SNT520-617 - 22220K - TSNG520 TIMKEN轴承座产品参数
| 参数 | 数据 | 说明 |
|---|---|---|
| Housing | SNT 520-617 | |
| Bearing | 22220K | |
| Locating Rings (width x OD) | SR180X12 | |
| Seal Type | Double Lip | |
| Seal | TSNG520 | |
| Adapter Sleeve | H320 | |
| Locknut | KM20 | |
| Lockwasher | MB20 | |
| End Cover | EC520-617 | Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required. |
| Material | Cast Iron | |
| Housing Mass | 17.6 Kg | |
| Bolt Qty | 2 | |
| Cage Type | EJ | |
| C1 Dynamic Load Rating | 435 | |
| C0 Static Load Rating | 502 | |
| Max Oil Speed | 3800 | |
| Max Grease Speed | 3100 | |
| Shaft Diameter d | 90 mm | |
| A | 160 mm | |
| A1 | 110 mm | |
| G | M24 | |
| H | 218 mm | |
| H1 | 112.0000 mm | |
| H2 | 40 mm | |
| J | 320 mm | |
| Jmax | 326 mm | |
| Jmin | 314 mm | |
| L | 380.0 mm | |
| N | 26 mm | |
| N1 | 32.00 mm |
| 参数 | 数据 | 说明 |
|---|---|---|
| Housing | SNT 520-617 | |
| Bearing | 22220K | |
| Locating Rings (width x OD) | SR180X12 | |
| Seal Type | Double Lip | |
| Seal | TSNG520 | |
| Adapter Sleeve | H320 | |
| Locknut | KM20 | |
| Lockwasher | MB20 | |
| End Cover | EC520-617 | Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required. |
| Material | Cast Iron | |
| Housing Mass | 17.6 Kg | |
| Bolt Qty | 2 | |
| Cage Type | EJ | |
| C1 Dynamic Load Rating | 435 | |
| C0 Static Load Rating | 502 | |
| Max Oil Speed | 3800 | |
| Max Grease Speed | 3100 | |
| Shaft Diameter d | 90 mm | |
| A | 160 mm | |
| A1 | 110 mm | |
| G | M24 | |
| H | 218 mm | |
| H1 | 112.0000 mm | |
| H2 | 40 mm | |
| J | 320 mm | |
| Jmax | 326 mm | |
| Jmin | 314 mm | |
| L | 380.0 mm | |
| N | 26 mm | |
| N1 | 32.00 mm |
