半自动圆锯床，电焊钢构件底座和电子气动控制，用圆锯片来切割铜铝等轻质合金

—可进行左45°至右45°任意角度锯切；锯头可以左向倾斜到45°以进行斜面切割

—锯床新一代MEP设计的双轴微处理器控制

操作：按相关按钮开始下列动作：—卡钳夹紧，马达启动—锯头下落，执行锯切

—马达停止—锯头回到顶点，卡钳打开

COBRA 352 SX evo, semi-automatic electropneumatic sawing machine to cut aluminium and light alloys using blade with electrowelded hardmetal plates (HM).

– The machine cuts from 45right to 45left and the head tilts from 0to 45left so as to make inclined cuts.

– Sawing machine with controlled single axis microprocessor designed by MEP.

OPERATION: Starting the cycle by means of the relative push-button the following steps are carried out: – the vice closes and the motor starts – the head goes down to execute cut – motor stops –head returns to top position and vice opens.