品牌
生产厂家厂商性质
所在地
| 规格/型号Model/Specification | 单位unit | HGL-1080V | ||||
| 工作台Table | ||||||
| 工作台面积Work table area | mm | 1000*800 | ||||
| T型槽（槽数*宽度）Tslot(Size*width) | mm | 5*14 | ||||
| 工作台最在大负荷Maximum load | kg | 700 | ||||
| 行程Stroke | ||||||
| 左右行程(X)Lingintdina(X-axis) | mm | 1000 | ||||
| 前后行程(Y)cross travel(Y-axis) | mm | 800 | ||||
| 主轴头上下行程(Z)vertical travel(X-axis) | mm | 420 | ||||
| 主轴鼻端至工作台面距离 Distance from guide plane to spindle center | mm | 100-520 | ||||
| 主轴中心至前面钣金距离 Spindle center to the front sheet distance | mm | 750 | ||||
| 主轴Spindle | ||||||
| 主轴端孔斜度Spindle taper | BT40 ?140 | |||||
| 主轴转速Max.spindle speed | rpm | 18000 | ||||
| 驱动结构The highest spindle speed | 一体式 | |||||
| 进给Feed | ||||||
| 切削进给Cutting feed | m/min | 10 | ||||
| 快移速度Cutting feed rate | m/min | 24 | ||||
| 自动换刀装置Trades theknife installment automatically | ||||||
| 刀把形式The knife handle pattern | BT40 | |||||
| 刀具储存容量Tool storage capacity | tools | 16 | ||||
| 刀具Tool | 刀具长度Maximum tool length | mm | 200 | |||
| 刀具重量Maximum tool weight | kg | 3.5 | ||||
| 马达Motor | ||||||
| 主轴驱动马达axle actuates motor | kw | 11.0 | ||||
| 驱动马达X，Y，Z轴Servo motor of X.Y.Z.axis | kw | 3.0*3.0*3.0 | ||||
| 导轨结构The guide rail structure | ||||||
| X，Y轴X.Y-axis | 滚柱45*2 | |||||
| Z轴Z-axis | 滚柱45*2 | |||||
| 丝杆结构 | Screw structure | mm | XYZ：Φ40*10 | |||
| 机械重量、占地Mechanical weight and occupying lａnd area | ||||||
| 占地面积Machine size(L*W*H) | mm | 3200*2500*3200 | ||||
| 机械净重Machine weight | kg | 6500 | ||||
| 精度Accuracy | ||||||
| 定位精度 Pointing accuracy | 不带电子尺No-bring the electronic ruler | mm | ±0.005 | |||
| 重复精度 Repeat accuracy | 不带电子尺No-bring the electronic ruler | mm | ±0.003 | |||
| 三轴加速度 | Three axis acceleration | m/s2 | ||||
| 电力、空压需求electric power and air pressure consumption | ||||||
| 电力需求Electric power consumption | KVA | 15 | ||||
| 空压需求Air pressure | kgf/cm2 | 6 | ||||
| 规格/品牌Model/Specification | HGL-1080V | |||||
| 主配置 | 1 | 系统 System | ● | 980S(二次开发) | ||
| 2 | 机身 Fuselage | ● | 汇高 | |||
| 3 | 主轴 Spindle | ● | 汇高 | |||
| 4 | 三轴丝杆 Three shaft screw | ● | 中国台湾上银 C3级 | |||
| 5 | 三轴导轨 Three axis guide | ● | 中国台湾上银 P级 | |||
| 6 | 变频器 Converter | ● | 库马克 | |||
| 7 | 三轴马达 Three axis motor | ● | 日本安川 | |||
| 8 | 三轴驱动 Three shaft drive | ● | 日本安川 | |||
| 9 | 联轴器 Coupling | ● | 日本NBK | |||
| 10 | 油冷机 Oil cooling machine | ● | 雷德 | |||
| 11 | 轴承 Bearing | ● | 日本NSK | |||
| 12 | 刀库Tool storage | ▲ | 汇高 | |||
| 电气 | 13 | 防爆式工作灯Explosion-prooftype sunlight working lamp | ● | LED | ||
| 14 | 便携手动脉冲发生器Portable manual pulse generator | ● | 汇高 | |||
| 15 | 三色警示灯 Tricolor caution light | ● | LED | |||
| 16 | 自动注油器 The impermeator | ● | 宝腾 | |||
| 17 | 空气过滤装置Air filtration installment | ● | 中国台湾精器 | |||
| 18 | 电磁阀solenoidvalve | ● | 中国台湾精器 | |||
| 19 | 接触器 Contactor | ● | 德国施耐德 | |||
| 20 | 继电器+座 Relay+seat | ● | 日本和泉 | |||
| 21 | 电源变压器 Power sourc manostat | ● | 中国台湾金保 | |||
| 22 | 电源盒power box | ● | 中国台湾明伟 | |||
| 23 | 全封闭式防护罩 Fully enclosed | ● | 汇高 | |||
| 24 | 电控箱空调系统Electrically controlledboxair-conditinging system | ● | 汇高 | |||
| 25 | 气管windpipe | ● | 日本千代田 | |||
| 26 | 线材wire stock | ● | 进口防油线 | |||
| 其他功能部件 | 27 | 喷嘴切削液供给装置Spray nozzle cutting compoundsupplies installment | ● | |||
| 28 | 吹风装置 Blowing installment | ● | ||||
| 29 | 刚性攻牙 Rigid tapping | — | ||||
| 30 | 油雾收集系统 Oil mist gathering system | ● | ||||
| 31 | 第四轴、第五轴 The fourth axis,the fifth axis | ▲ | ||||
| 32 | 自动对刀仪Automatic tool setting gauge | ● | ||||
| 工具 | 33 | 技术手册 Technical manual | ● | |||
| 34 | 工具及工具箱 Tools and tool box | ● | ||||
| 附件 | 35 | 锁刀座 Locks the tool apron | ▲ | |||
| 36 | NBT40刀柄 NBT40 The hilt | ▲ | ||||
| 37 | ER嗦咀ER The suontiue | ● | ||||
| 38 | 压板M12-16 The clamp M12-16 | ● | ||||
| 39 | 虎钳6＂-8＂ The vise6＂-8＂ | ● | ||||
| 附件不保修 注：“●”为现配，“—”为不配，“▲”为选配。 Note: “●”for the sign,“—”for does not match,“▲”for the match. | ||||||
