定子 / 轉子

DPM 160 系列定子 / 轉子

参考价: 面议

具体成交价以合同协议为准
2022-05-26 13:17:35
254
产品属性
关闭
晟昌機電股份有限公司

晟昌機電股份有限公司

免费会员
收藏

组合推荐相似产品

产品简介

定子 / 轉子

详细介绍

Type
Performances
Peak torque
Continuous torque
Stall torque
Torque constant
Back EMF constant(*)
Motor constant
Electrical resistance at 20°C(*)
Electrical inductance(*)
Peak current
Continuous current
Stall current
Max continuous power dissipation
Nominal input voltage
Thermal time constant
Thermal resistance
Number of poles
Rotor inertia
Rotor mass
Stator mass
Max Detent torque (average to peak)
Stall speed
Water temperature difference for PC
Minimum water flow for Δθw
Max pressure drop at qw
Type DPM 160-70 DPM 160-90 DPM 160-110 DPM 160-140 DPM 160-190
Performances Unit Free Ait
Convection		 Water
Cooling		 Free Ait
Convection		 Water
Cooling		 Free Ait
Convection		 Water
Cooling		 Free Ait
Convection		 Water
Cooling		 Free Ait
Convection		 Water
Cooling
Peak torque Tp Nm 38.1 38.1 63.5 63.5 88.8 88.8 126.9 126.9 190.7 19.07
Continuous torque Tc Nm 8.6 19 13.9 32 19.5 45.3 27.6 65.2 40.8 97.8
Stall torque Ts Nm 6.57 14.7 10.6 25.4 14.9 35.8 20.8 51.3 31 77.2
Torque constant Kt Nm/Arms 3.08 3.08 5.12 5.12 3.6 3.6 5.12 5.12 7.71 7.71
Back EMF constant(*) Ku Vrms/(rad/s) 1.78 1.78 2.95 2.95 2.06 2.06 2.96 2.96 4.47 4.47
Motor constant Km Nm/√W 0.921 0.921 1.27 1.27 1.6 1.6 2 2 2.54 2.54
Electrical resistance at 20°C(*) R20 Ohm 7.51 4.51 10.2 10.2 3.26 3.26 4.1 4.1 6.16 6.16
Electrical inductance(*) L1 Mh 33.7 32.6 56.2 54.3 19.5 18.8 27.8 26.9 42.1 40.6
Peak current Ip Arms 19.7 19.7 19.6 19.6 39.2 39.2 39.2 39.2 39.2 39.2
Continuous current Ic Arms 2.81 6.58 2.78 6.74 5.49 13.3 5.41 13.4 5.37 13.65
Stall current Is Arms 2.14 5.0 2.1 5.1 4.16 10.1 4.08 10.1 4.08 10.3
Max continuous power dissipation Pc W 129 705 170 1010 212 1300 275 1760 380 2480
Nominal input voltage Udc VDC 600 600 600 600 600 600 600 600 600 600
Thermal time constant τth S 2300 120 2200 93 2100 83 2000 72 2100 65
Thermal resistance Rth K/W 0.82 0.153 0.617 0.106 0.494 0.0828 0.381 0.061 0.275 0.0433
Number of poles 2P - 22 22 22 22 22 22 22 22 22 22
Rotor inertia J kgm2 9.8E-004 9.8E-004 1.5E-003 1.5E-003 2.2E-003 2.2E-003 3.2E-003 3.2E-003 4.8E-003 4.8E-003
Rotor mass Mr kg 0.73 0.73 1.16 1.16 1.65 1.65 2.4 2.4 3.6 3.6
Stator mass Ms kg 4.6 4.6 6 6 7.73 7.73 9.85 9.85 14.5 14.5
Max Detent torque (average to peak) Td Nm 0.2 0.2 0.33 0.33 0.46 0.46 0.65 0.65 0.98 0.98
Stall speed ns rpm 0.024 0.47 0.025 0.59 0.026 0.66 0.027 0.76 0.027 0.85
Water temperature difference for PC Δθw K - 5 - 5 - 5 - 5 - 5
Minimum water flow for Δθw qw l/min - 2 - 2.9 - 3.7 - 5.1 - 7.1
Max pressure drop at qw Δpw bar - 1 - 1 - 1 - 1 - 1
上一篇：螺杆支撑座的作用 下一篇：如何合理设计机床钣金的支撑结构和防护装置？
热线电话 在线询价
提示

请选择您要拨打的电话：