品牌
生产厂家厂商性质
常州市所在地
SKFSKF感应轴承加热器TIH 030m 常州厂家 SKF感应轴承加热器
面议GJT30W型GJT30W型机车轮箍加热器(适用于机车轮箍、长短轮芯、从动齿轮等快速加热)
面议GJT30L型大型GJT30L型大型齿轮加热器 适用于重型齿轮(硬齿面齿轮)快速加热 齿轮加热
面议GJT30W型大型GJT30W型大型轴承加热器 适用于内径较大的工件快速加热
面议GJT30W-C型中、大型GJT30W-C型中
面议GJT30W-3CA型GJT30W-3CA型皮带轮加热器国内大型皮带轮加热器生产厂家
面议GJT30W-2C(3C)GJT30W-2C(3C)多功能轴承加热器/多功能齿轮加热器/多功能加热器
面议GJT30L型大型GJT30L型大型联轴器加热器
面议GJT30L-SJ大型GJT30L-SJ大型齿轮加热器/齿轮感应加热器/风机叶轮加热器/端盖加热器
面议GJT30L-DJ/S型GJT30L-DJ/S型泵壳加热器/电机铝壳加热器/电机壳加热器/铝机壳加热器
面议GJT30L-DJ3/T大型GJT30L-DJ3/T大型电机铝壳加热器
面议GJT30K型GJT30K型联轴器加热器,适用于小型联轴器、齿轮、齿圈、端盖等快速加热
面议GJT30K型齿轮加热器适用于齿轮、齿圈、端盖、联轴器等快速加热
| 一、齿轮加热器用途: GJT30系列加热器,主要用于齿轮金属件进行加热,使之膨胀,以满足过盈装配或拆卸的需要。 二、齿轮加热器结构与工作原理 ● 结构 GJT30系列加热器由干式自冷工频感应加热装置(以下简称主机)与控制设备组成。 ● 工作原理 1、短路加热: 主机为一特殊结构的变压器,可移动的轭铁用以直接穿套轴承或其它被加热工件。工作时,接通主机电源,工件(相当于副边饶组)中感应产生短路电流而被加热。 2、涡流加热: 被加热工件与主机的铁芯组成一闭合的磁回路,工作时,工件中通过主机的磁力线产生涡流而被快速加热。 三、GJT30K齿轮加热器优点: ● 提高效率 工作效率提高4倍以上,操作人员减少80% ; ● 降低成本 节电70%以上,节油*,节约厂房占地面积60%以上 ; ● 保护环境:无油汽油污染空气,有利于环境改善和工作人员的身体健康。 ●提升品质: 加热均匀,工件表面清洁,硬度不变,自动退磁符合JB/T6641-2007 标准 ; ● 运行可靠:操作方便、安全,设备故障率级低,主机三包18个月,绝缘达B级 ;
|
四、齿轮加热器主要技术参数:
型号规格 | 额定 容量 (KVA) | 适用工件尺寸(mm) | 结构 | |||
内径 | zui大 外径 | zui大宽度 | ||||
上限 | 下限 | |||||
GJT30K-2 | 9.5 | 10-70 | 150 | 10 | 70 | 开启式 |
GJT30K-3 | 12 | 20-70 | 220 | 根据工件尺寸商定 | 120 | |
GJT30K-4 | 15.2 | 25-90 | 350 | 200 | ||
GJT30K-5 | 22 | 40-110 | 520 | 230 |
Gear heater can heat the workpiece, such as gear 、gear ring 、end cap and coupling ,etc.
Technical parameters:
Model specification | Rated capacity (KVA) | Applicable work pieces size (mm) | Structue | |||
Diameter | Maximum diameter | Maximum width | ||||
Upper limit | Lower limit | |||||
GJT30K-2 | 9.5 | 10-70 | 150 | 10 | 70 | Open type |
GJT30K-3 | 12 | 20-70 | 220 | Confirmation according to work piece dimension . | 120 | |
GJT30K-4 | 15.2 | 25-90 | 350 | 200 | ||
GJT30K-5 | 22 | 40-110 | 520 | 230 |
GJT30-type induction heater is characterized by the following:
1、 To improve the assembly quality, uniform heating, high precision, enable the inherent quality of the workpiece surface hardness unchanged.
2、High efficiency, rapid heating rate, can reduce the labor intensity of workers, but also improve the assembly progress, to civilization production.
3、Reasonable structure, advanced, simple, safe, reliable, and no fire hazard.
4、To save energy, reduce costs, improve efficiency, fuel-efficient compared with the oil heated by 100 ℅, and compared to electric furnace power by 60℅.
5、BGJ induction heater after the heating, will automatic back the residual magnetic under 3CS in line with the JB/T6641-2007 standard.