品牌
厂商性质
所在地
项目ITEM | 机型MODEL | UNIT | VT-15L | VT-17L | |
加工能力 | CAPACITIES | ||||
zui大旋徑(底座) | Swing over bed | mm(inch) | Φ480 (18.9") | ||
zui大旋徑(滑座) | Swing over cross slide | mm(inch) | Φ280(11) | ||
zui大加工徑 | Max tuming diameter | mm(inch) | Φ300(11.8”) | Φ400(15.7”) | |
zui大加工長 | Max tuming length | mm(inch) | 370(14.6”) | ||
行程 | TRAVERSE | ||||
X軸行程 | X-axis traver | mm(inch) | 150+20(5.9+0.8) | 220+20(8.7+0.8) | |
Z軸行程 | Z-axis traver | mm(inch) | 380(15”) | 450(17.7“) | |
主轴 | SPINDLE | ||||
主軸鼻端型式 | Type of spindle noes | ISO | A2-5 | A2-6 | |
夹头外径 | Chuck diameter | inch | 6” | 8” | |
主轴前端轴承 | Spindle bearing inner diameter | mm(inch) | Φ90(3.5”) | Φ110(4.3”) | |
主軸通孔 | Spindle thru hole diameter | mm(inch) | Φ52(2”) | Φ62(2.4”) | |
主軸馬達 | Spindle drive moto(30min) | HP | 10 | 15 | |
主軸轉速 | Spindle speed range | rpm | 6000 | 5000 | |
棒材容許直徑 | Through bar capacity | mm(inch) | Φ42(1.7”) | Φ52(2”) | |
刀塔 | TURRET | ||||
刀塔形式 | Number of tool stations | | 10(ALEX or VD130) | ||
換刀時間 | Turret indexing time | SEC | 0.8 | ||
方形刀柄高度 | Shank height of square tool | mm(inch) | 20(0.8”) | ||
搪孔刀 | Shank diameter for boring bar | mm(inch) | Φ25(1”) | ||
进给 | FEEDRATE | ||||
X軸快速移動 | Ranid traverse rate X-axis | mm(inch) | 20 | ||
Z軸快速移動 | Ranid traverse rate Z-axis | mm(inch) | 20 | ||
尾座 | TAILSTOCK | ||||
尾座行程 | Tailstock travel | mm(inch) | 300(11.8) | ||
尾座心軸直徑 | Tailstock spindle diameter | mm(inch) | Φ60(2.4”) | ||
尾座心軸行程 | Tailstock spindle travel | mm(inch) | 80(3.4”) | ||
尾座心軸推拔 | Taper hole of tailstock quill | | MT-3 | ||
其他 | REMARKS | ||||
冷卻幫浦 | Coolant pump motor | HP | 3/4 | ||
水箱容積 | Coolant tank volume | Liter | 205 | ||
佔地面積 | Floor space | Mm(inch) | 2520X2010(99 X 79) | ||
機器重量 | Machine weight | Kg | 3300 | 3500 |