SS-27F 臥式鑽孔機单线钻孔机-机床商务网

仕兴持续的致力于研究与发展新产品、并以稳定性能和提高方便性为其最终设计目标。我们提供一贯高规格的磨刀机、裁板机、集尘机、四面刨木机、砂光机、作榫机、自动裁板机、钻孔机、木材切断锯、封边机、旋臂吊锯机、四面刨木机 (全罩式护罩)、带锯机、立轴机、直线纵锯机、作榫机自动仿型边机和单板薄片加工机，仕兴机械工业股份有限公司以30年以上相关经验、持续且积极开发及提供优质产品、并致力于提供完善的客户服务、以达......

Solid one piece base.
Bores from the bottom side of the work piece, which gives a uniform and accurate depth of bore because the depth is not affected by variations in board thickness. Secondly, this advantage also prevents the external surfaces of the work piece from being marred by the METAL worktable.
Independent pneumatic pedals operation require minimum maintenance.
Convenient front location of the control panel allows easy adjustment of the pneumatic speed regulator and boring methods selection.
All motor are activated only during boring which minimizes the power consumption & noise.

MODEL	SS-27F	SS-35F	SS-35BF
Motor	4 HP/3ph	4 HP/3ph	4 HP/3ph x 2
Spindle speed	2875 rpm(50Hz), 3450 rpm(60Hz)
Table size	1060x500mm	1320x500mm	1320x500mm
Table height	890mm	890mm	890mm
Maximum work piece size	1060x300mm	1060x300mm	1060x300mm
Maximum thickness of panel	80mm	80mm	80mm
Boring method	Pneumatic system	Pneumatic system	Pneumatic system
Maximum boring depth	Adjustable max. 75mm	Adjustable max. 75mm	Adjustable max. 75mm
Maximum working speed	0-15 cycle/min	0-15 cycle/min	0-15 cycle/min
Quick chuck	Quick chuck x 12PCs	Quick chuck x 12PCs	Quick chuck x 12PCs
Pitch of spindles	32mm	32mm	32mm
No. of spindles	27PCs	35PCs	35PCs
Distance between 1st & last spindles	832mm	1088mm	1088mm
Net weight	295kg(650LB)	318kg(700LB)	350kg(770LB)
Gross weight	386kg(850LB)	418kg(850LB)	450kg(990LB)
Packing size	135x83x115mm	160x83x115mm	160x83x115mm
Overall size	135x120x140mm	160x120x140mm	160x120x140mm