| 項目 / 機種 | | S80 CY | S100 CY |
| CAPACITY | | | |
| Center Height | mm(in) | 1065 (41.92) | 1300 (51.18") |
| Swing Over Bed | mm(in) | Ø2000(78.74") | - |
| Swing Over Cross Slide | mm(in) | Ø1550(61.02") | Ø1950(76.77") |
| Distance Between Center | mm(in) | 2000(78.84")~12000(472.44") | 2000(78.84")~12000(472.44") over |
| HEADSTOCK | | | |
| Spindle Nose | | A2-15 (OPTA2-20.A2-28) | A2-15 (OPTA2-20.A2-28) |
| Spindle Bore | mm(in) | Ø230(9.05") (OPT: 360(14.1"), 410(16.1),535(21") |
| Spindle Motor | Kw(hp) | 37/45kw(50/60HP) (opt. 60/75kw(80/100HP) / 100kw (130HP) |
| TURRET | | | |
| Turret Type | | Hydraulic / Servo |
| No of Tool Station | | 12 or 4 |
| Tool Shank Cross Section | mm(in) | □ 40 (1.6") or □ 50 (2") |
| TRAVEL | | | |
| Travel X axis | mm(in) | 1000(39.37") | 1200(47.24") |
| Travel Z axis | mm(in) | 2000(78.84")~12000(472.44") over |
| C AXIS (OPT.) | | | |
| Turret type | | BARUFFALDI-TBMA320 |
| Tool station | | 12×VDI 60 |
| Max. tapping tool | mm | M24 |
| Y axis | | | |
| Travel axis | mm | ± 110 |
| TAILSTOCK | | | |
| Quill travel | | MT＃6 |
| COOLANT SYSTEM 3 bars(opt.15bars) | | | |
| Tank capacity | liter | 350 |
| Pump motor | hp | 0.25 |
| CONTROL | | | |
| Control unit | | FANUC Oi-TD (OPT FANUC 18i-TB) |
